Cisco ASR 9000 Series - Show Ethernet Loopback Permitted

show ethernet loopback permitted
To display all the interfaces which are permitted to run loopback sessions, use the show ethernet loopback
permitted command in the EXEC mode.
show ethernet loopback permitted
Syntax Description
This command has no keywords or arguments.
Command Default
No default behavior or values
Command Modes
EXEC(#)
Command History
ModificationRelease
This command was introduced.Release 5.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
executeethernet-services
Examples
This example shows a sample output of the show ethernet loopback permitted command:
RP/0/RSP0/CPU0:routershow ethernet loopback permitted
Interface Direction
------------------------------------------------
GigabitEthernet0/0/0/0 External
GigabitEthernet0/0/0/1.100 Internal
TenGigE0/1/0/0.200 External, Internal
These are the description of the fields in the command output:
•
Interface: Specifies the interface on which loopback is permitted.
•
Direction: Specifies the direction in which the loopback is permitted on that interface.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
365
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
show ethernet loopback permitted