Specifies the local Customer Edge (CE) identifier.
ce-id ce-id-value
Specifies the remote Customer Edge (CE) identifier.remote-ce-id
remote-ce-id-value
(Optional) Service identifier. Valid service identifiers are:
• icc-based icc-string umc-string—ITU-based Carrier Code format, with
the total ICC and Unique MEG ID Code (UMC) string length no greater
than 13 characters.
• number number—Number from 0 to 65535.
• string text—String length no longer than 46 minus MDID length.
• vlan-id id-number—Number from 1 to 4094.
• vpn-id oui-vpnid —VPN ID in RFC 2685 format (HHH:HHHH)
id
Command Default
If id is not specified, the service name is used as the Short MA name.
Command Modes
CFM domain configuration (config-cfm-dmn)
Command History
ModificationRelease
This command was introduced.Release 3.9.0
This command was modified. The icc-based keyword was added.Release 4.1.0
This command was modified to enable CFM on
multipoint-to-multipoint cross connects.
Release 5.3.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The Short MA Name is the second part of the Maintenance Assoication Identifier (MAID) in CFM frames.
If the Short MA Name (service id) is not specified, the service administrative name is used by default.
Task ID
OperationsTask ID
read, writeethernet-services
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
315
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
service
To Next Page
Loading...
Need help?
General
