Cisco ASR 9000 Series Command Reference Guide

action wiring-conflict
To configure what action is taken on an interface when a wiring-conflict event occurs, use the action
wiring-conflict command in Ethernet OAM configuration mode or interface Ethernet OAM configuration
mode. To return to the default, use the no form of this command.
action wiring-conflict {disable| efd | error-disable-interface| log}
no action wiring-conflict {disable| efd | error-disable-interface| log}
Syntax Description
Performs no action on the interface when a capabilities-conflict event occurs.disable
Puts the line protocol into the down state for an interface when a capabilities-conflict
event occurs. The state is removed when the first packet is received without a
conflict.
efd
Puts the interface into the error-disable state when a capabilities-conflict event
occurs.
error-disable-interface
(Interface Ethernet OAM configuration only) Creates a syslog entry when a
capabilities-conflict event occurs. This action is available only in interface Ethernet
OAM configuration mode to override the OAM profile on a specific interface.
log
Command Default
The default action is to put the interface into error-disable state.
Command Modes
Ethernet OAM configuration (config-eoam)
Interface Ethernet OAM configuration (config-if-eoam)
Command History
ModificationRelease
This command was introduced.Release 3.9.0
The efd keyword was added.Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writeethernet-services
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
153
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
action wiring-conflict

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model