show lldp neighbors
To display information about Link Layer Discovery Protocol (LLDP) neighbors, use the show lldp neighbors
command in EXEC configuration mode.
show lldp neighbors [type interface-path-id | location location] [detail]
Syntax Description
(Optional) Interface type. For more information, use the question mark (?) online
help function.
type
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router. For more information about the syntax for the
router, use the question mark (?) online help function.
Note
interface-path-id
(Optional) Displays information about LLDP neighbors for the specified location.
The location argument is entered in the rack/slot/module notation.
location location
(Optional) Displays all available information about LLDP neighbors.detail
Command Default
Basic device information for LLDP neighbors is displayed.
Command Modes
EXEC (#)
Command History
ModificationRelease
This command was introduced.Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
To clear the neighbor information displayed by the show lldp neighbors command, use the clear lldp table
command.
Task ID
OperationTask ID
readethernet-services
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
118
Ethernet Interface Commands on the Cisco ASR 9000 Series Router
show lldp neighbors
To Next Page
Loading...
