Cisco ASR 9000 Series Command Reference Guide

DescriptionCommand
Displays information about errors that are preventing
configured cfm operations from becoming active, as
well as any warnings that have occurred.
show ethernet cfm configuration-errors, on page 322
Displays all the maintenance points that have been
created.
show ethernet cfm local maintenance-points, on page
330
Displays information about local MEPs.show ethernet cfm local meps, on page 333
Displays other MEPs detected by a local MEP.show ethernet cfm peer meps, on page 339
Configures a cross-connect group.xconnect group
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
317
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
service

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model