Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The level must be specified.
The maintenance domain identifier (MDID) is used as the first part of the maintenance association identifier
(MAID) in CFM frames. If the MDID is not specified, the domain name is used as the MDID by default.
Multiple domains may be specified at the same level. If the MDID is specified as NULL, the MAID is
constructed as a short maintenance association name.
Task ID
OperationsTask ID
read, writeethernet-services
Examples
The following example shows how to create a domain and give it a domain name, level, and maintenance
domain identifier (MDID):
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# ethernet cfm
RP/0/RSP0/CPU0:router(config-cfm)# domain Domain_One level 1 id string D1
RP/0/RSP0/CPU0:router(config-cfm-dmn)#
Related Commands
DescriptionCommand
Enters CFM configuration mode.ethernet cfm (global), on page 207
Enters interface CFM configuration mode.ethernet cfm (interface), on page 209
Creates a MEP on an interface.mep domain, on page 279
service, on page 314
Displays information about errors that are preventing
configured CFM operations from becoming active, as well
as any warnings that have occurred.
show ethernet cfm configuration-errors, on page
322
Displays a list of local maintenance points.show ethernet cfm local maintenance-points, on
page 330
Displays information about local MEPs.show ethernet cfm local meps, on page 333
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
202
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
domain
To Next Page
Loading...
Need help?
General
