Cisco ASR 9000 Series Command Reference Guide

11 12305 Control ethernet echo
12 0 Control eth echo reply
13 0 Card Configuration Protocol
14 0 Reserved for Attach
15 0 Chassis controller
16 0 Forwarding driver
17 16414 MBI hello
18 0 MBI Boot Server Source
19 0 HSR ES client
20 0 Test application 1
21 0 Test application 2
22 0 Test client out-of-band
Table 34: show controllers backplane ethernet location clients Field Descriptions
DescriptionField
Identifies the Ethernet interface.Intf Name
Identifies the Ethernet server for the specified
interface.
Client ethernet server id
Identifies the client process running on the specified
interface.
Client process id
Describes the backplane client application.Description
Related Commands
DescriptionCommand
display brief information about backplane Ethernet
interfaces in a particular location
show controllers backplane ethernet location brief,
on page 542
Displays detailed information about the backplane
interfaces in a particular location.
show controllers backplane ethernet location
detail, on page 547
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
546
Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router
show controllers backplane ethernet location clients

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model