Cisco ASR 9000 Series Command Reference Guide

Internal Ethernet Control Network Commands on
the Cisco ASR 9000 Series Router
This module provides command line interface (CLI) commands for configuring internal ethernet control on
your router.
•
clear controller backplane ethernet location statistics, page 534
•
show controllers backplane ethernet brief, page 535
•
show controllers backplane ethernet clients, page 536
•
show controllers backplane ethernet detail, page 538
•
show controllers backplane ethernet multicast groups, page 540
•
show controllers backplane ethernet location brief, page 542
•
show controllers backplane ethernet location clients, page 545
•
show controllers backplane ethernet location detail, page 547
•
show controllers backplane ethernet location multicast groups, page 550
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
533

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model