Cisco ASR 9000 Series - Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference

Examples
The following examples show how to use the show bundle load-balancing command and its various keywords:
RP/0/RSP0/CPU0:router# show bundle load-balancing brief
Node: 0/0/CPU0
Sub-Intf Member
Total
Interface Count Count Wgt.
----------------- -------- ------------
Bundle-Ether12345 10 63 134
Node: 0/1/CPU0
Sub-Intf Member
Total
Interface Count Count Wgt.
----------------- -------- ------------
Bundle-Ether12345 10 63 134
show bundle load-balancing brief location 0/0/CPU0
Node: 0/0/CPU0
Sub-Intf Member
Total
Interface Count Count Wgt.
----------------- -------- ------------
Bundle-Ether12345 10 63 134
RP/0/RSP0/CPU0:router# show bundle load-balancing location 0/0/CPU0
==============================================================================
Bundle-Ether12345
Type: Ether (L2)
Members: 63
Total Weighting: 134
Sub-interfaces: 10
Member Information:
Port ID BW
------------ -- --
Gi0/0/0/1 0 10
Gi0/0/0/3 1 1
[...]
Platform Information:
=====================
Bundle Summary Information:
---------------------------
Interface : Bundle-Ether100 Ifhandle : 0xa0000a0
Lag ID : 1 Virtual Port : 20
Number of Members : 4 Local to LC : 1
Member Information:
ul_id Interface ifhandle SFP port slot
----- --------- --------- --- ---- ----
0 Gi0/4/0/3 0x8000100 16 3 4
1 Gi0/4/0/10 0x80002c0 17 10 4
2 Gi0/4/0/17 0x8000480 17 17 4
3 Gi0/4/0/24 0x8000640 18 4 4
Bundle Table Information:
-------------------------
[NP 0]:
---------------------------------------------------------------------
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
639
Link Bundling Commands on the Cisco ASR 9000 Series Router
show bundle load-balancing