Cisco ASR 9000 Series Command Reference Guide

Task ID
OperationsTask ID
read, writeethernet-services
Examples
The following example shows how to configure AIS transmission on a CFM interface.
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# interface gigabitethernet 0/1/0/2
RP/0/RSP0/CPU0:router(config-if)# ethernet cfm
RP/0/RSP0/CPU0:router(config-if-cfm)# ais transmission up interval 1m cos 7
Related Commands
DescriptionCommand
Configures AIS transmission for a CFM domain service.ais transmission, on page 157
Configures AIS logging for a CFM domain service to indicate
when AIS or LCK packets are received.
log ais, on page 263
Displays the information about interfaces that are currently
transmitting AIS.
show ethernet cfm interfaces ais, on page
324
Displays information about local MEPs.show ethernet cfm local meps, on page 333
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
160
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
ais transmission up

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model