EasyManuals Logo

Cisco ASR 9000 Series Command Reference Guide

Cisco ASR 9000 Series
1138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #115 background imageLoading...
Page #115 background image
lldp tlv-select disable
To disable transmission of the selected Type Length Value (TLV) in Link Layer Discovery Protocol (LLDP)
packets, use the lld tlv-select disable command in global configuration mode. To return to the default, use
the no form of this command.
lldp tlv-select tlv-name disable
no lldp tlv-select tlv-name disable
Syntax Description
Name of the TLV to be suppressed from LLDP packets. The tlv-name can be one of the
following LLDP TLV types:
•
management-address
•
port-description
•
system-capabilities
•
system-description
•
system-name
tlv-name
Command Default
All TLVs are sent in LLDP packets.
Command Modes
Global configuration (config)
Command History
ModificationRelease
This command was introduced.Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Certain TLVs are classified as mandatory in LLDP packets, such as the Chassis ID, Port ID, and Time to Live
(TTL) TLVs. These TLVs must be present in every LLDP packet. You can use the lldp tlv-select disable
command to suppress transmission of certain other optional TLVs in LLDP packets.
Task ID
OperationTask ID
read, writeethernet-services
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
95
Ethernet Interface Commands on the Cisco ASR 9000 Series Router
lldp tlv-select disable

Table of Contents

Other manuals for Cisco ASR 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9000 Series and is the answer not in the manual?

Cisco ASR 9000 Series Specifications

General IconGeneral
SeriesASR 9000
CategoryNetwork Router
Modular DesignYes
RedundancyYes (Hardware and Software)
Operating SystemCisco IOS XR
Interfaces/Ports10G, 40G, 100G, 400G Ethernet
Expansion SlotsVaries by model
Routing ProtocolBGP, OSPF, IS-IS, EIGRP
ManagementCLI, SNMP, NETCONF
Power SupplyRedundant
Port DensityVaries by model
Power Supply OptionsAC, DC
MemoryVaries by model
StorageVaries by model
DimensionsVaries by model
WeightVaries by model

Related product manuals