Cisco ASR 9000 Series Command Reference Guide

Related Commands
DescriptionCommand
Specifies or creates an Ethernet interface and enters interface
configuration mode.
interface (Ethernet), on page 85
Enables E-LMI operation on an interface and enters interface
Ethernet LMI configuration mode.
ethernet lmi, on page 211
Displays E-LMI information for an interface, including protocol
status and error and event statistics.
show ethernet lmi interfaces, on page
355
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
405
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
status-counter

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model