Cisco ASR 9000 Series Command Reference Guide

Related Commands
DescriptionCommand
Specifies or creates a new bundle and enters interface configuration
mode for that bundle.
interface (bundle), on page 590
Enables use of Cisco-specific TLVs in addition to standard TLVs for
negotiating and exchanging LACP information on link bundles.
lacp cisco enable, on page 592
Displays information about configured bundles.show bundle, on page 619
Displays load balancing information, such as the ports, usage, weight,
and distribution of traffic on individual members of a link bundle
interface.
show bundle load-balancing, on page
638
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
575
Link Bundling Commands on the Cisco ASR 9000 Series Router
bundle load-balancing hash

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model