Name: Cisco ASR 9000 Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

clear ethernet lmi interfaces

To clear Ethernet LMI statistics on one or all interfaces, use the clear ethernet lmi interfaces command in

EXEC configuration mode.

clear ethernet lmi interfaces {type interface-path-id | all}

Syntax Description

Interface type. For more information, use the question mark (?) online help function.

type

Physical interface or virtual interface.

Use the show interfaces command to see a list of all interfaces currently

configured on the router.

Note

For more information about the syntax for the router, use the question mark (?) online

help function.

interface-path-id

Specifies clearing of LMI statistics for all Ethernet interfaces running the E-LMI

protocol.

all

Command Default

None

Command Modes

EXEC (#)

Command History

ModificationRelease

This command was introduced.Release 4.1.0

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task

IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator

for assistance.

Task ID

OperationTask ID

executeethernet-services

Examples

The following example shows how to clear E-LMI statistics for Gigabit Ethernet interface 0/0/0/0:

RP/0/RSP0/CPU0:router# clear ethernet lmi interfaces GigabitEthernet 0/0/0/0

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Release 5.3.x

175

Ethernet OAM Commands on the Cisco ASR 9000 Series Router

clear ethernet lmi interfaces

Cisco ASR 9000 Series Command Reference Guide

Other manuals for Cisco ASR 9000 Series