Cisco ASR 9000 Series Command Reference Guide

show mac-accounting (Ethernet)
To display MAC accounting statistics for an interface, use the show mac-accounting command in EXEC
mode.
show mac-accounting {GigabitEthernet| TenGigE} interface-path-id [location node-id]
Syntax Description
Indicates the type of Ethernet interface whose MAC accounting statistics
you want to display. Enter GigabitEthernet, TenGigE , .
{GigabitEthernet |
TenGigEHundred
GigEbundle-ether }
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces
currently configured on the router.
Note
For more information about the syntax for the router, use the question mark
(?) online help function.
interface-path-id
(Optional) Displays detailed MAC accounting information for the specified
interface on the specified node. The node-id argument is entered in the
rack/slot/module/port notation.
location node-id
Command Default
No default behavior or values
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.1.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
For the interface-path-id argument, use these guidelines:
•
If specifying a physical interface, the naming notation is rack/slot/module/port. The slash between values
is required as part of the notation. An explanation of each component of the naming notation is as follows:
◦
rack: Chassis number of the rack.
◦
slot: Physical slot number of the line card.
◦
module: Module number. A physical layer interface module (PLIM) is always 0.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
123
Ethernet Interface Commands on the Cisco ASR 9000 Series Router
show mac-accounting (Ethernet)

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model