show mlacp counters
To display counters relating to mLACP information transferred to and from the local device, use the show
mlacp counters command in the EXEC mode.
show mlacp counters [bdl-info| ig-info| mbr-info [bundle interface| member interface| iccp-group group-id|
mlacp-device device-id| mlacp-interface foreign-member-interface]]
Syntax Description
Displays the requested information associated with the bundle interface.Bundle-Ether
Displays the requested information associated with the member interface.member interface
Displays information on the mLACP counters.counters
Displays the bundles counters.bdl-info
Displays the ICCP group counters.ig-info
Displays the member counters.mbr-info
Displays the requested information associated with the mLACP device.
The mlacp-device and mlacp-interface keywords are available
only when mLACP devices and mLACP interfaces are configured.
Note
mlacp-device
Displays the requested information associated with the mLACP interface.mlacp-interface
Command Default
No default behavior or values
Command Modes
Exec
Command History
ModificationRelease
This command was introduced.Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
663
Link Bundling Commands on the Cisco ASR 9000 Series Router
show mlacp counters
To Next Page
Loading...
Need help?
General
