Cisco ASR 9000 Series Command Reference Guide

Resulting System Actionspeed Commandduplex Command
Autonegotiates for duplex mode
and forces 100 Mbps.
speed 100no duplex
Autonegotiates for duplex mode
and forces 10 Mbps.
speed 10no duplex
Forces full duplex and
autonegotiates for speed.
no speedduplex full
Forces 1000 Mbps (1 Gbps) and
full duplex.
speed 1000duplex full
Forces 100 Mbps and full duplex.speed 100duplex full
Forces 10 Mbps and full duplex.speed 10duplex full
Forces half duplex and
autonegotiates for speed (10 or 100
Mbps.)
no speedduplex half
Forces 100 Mbps and half duplex.speed 100duplex half
Forces 10 Mbps and half duplex.speed 10duplex half
Task ID
OperationsTask ID
read, writeinterface
Examples
This example shows how to configure the Management Ethernet interface to transmit at one gigabit:
RP/0/RSP0/CPU0:router(config)# interface MgmtEth 0/RSP0/CPU0/0
RP/0/RSP0/CPU0:router(config-if)# speed 1000
Related Commands
DescriptionCommand
Enters interface configuration mode for the Management Ethernet
interface.
interface MgmtEth, on page 668
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
673
Management Ethernet Interface Commands on the Cisco ASR 9000 Series Router
speed (Management Ethernet)

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model