EasyManuals Logo

Cisco ASR 9000 Series Command Reference Guide

Cisco ASR 9000 Series
1138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #263 background imageLoading...
Page #263 background image
Command History
ModificationRelease
This command was introduced.Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
executeethernet-services
Examples
This example shows a minimum configuration, that specifies the local domain and source interface and target
MEP, using these defaults:
•
Send a burst once for a packet count of 100 and interval of 100 milliseconds .
•
The number of packets to be used for FLR calculation is 100.
•
Measure the one way loss statistics in both the directions .
•
Aggregate statistics into one bin.
•
Schedule now.
•
Display results on the console.
RP/0/RSP0/CPU0:routerethernet sla on-demand operation type cfm-synthetic-loss-measurement
probe
domain D1 source interface TenGigE 0/6/1/0 target mac-address 2.3.4
Related Commands
DescriptionCommand
Deletes the contents of buckets containing SLA statistics
collected by all operations probes.
clear ethernet sla statistics all, on page 179
Deletes the contents of buckets containing SLA statistics
collected by on-demand probes.
clear ethernet sla statistics on-demand, on
page 181
Displays information about configured Ethernet SLA
operations.
show ethernet sla operations, on page 382
Displays the contents of buckets containing Ethernet SLA
metrics collected by probes.
show ethernet sla statistics, on page 385
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
243
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
ethernet sla on-demand operation type cfm-synthetic-loss-measurement probe

Table of Contents

Other manuals for Cisco ASR 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9000 Series and is the answer not in the manual?

Cisco ASR 9000 Series Specifications

General IconGeneral
SeriesASR 9000
CategoryNetwork Router
Modular DesignYes
RedundancyYes (Hardware and Software)
Operating SystemCisco IOS XR
Interfaces/Ports10G, 40G, 100G, 400G Ethernet
Expansion SlotsVaries by model
Routing ProtocolBGP, OSPF, IS-IS, EIGRP
ManagementCLI, SNMP, NETCONF
Power SupplyRedundant
Port DensityVaries by model
Power Supply OptionsAC, DC
MemoryVaries by model
StorageVaries by model
DimensionsVaries by model
WeightVaries by model

Related product manuals