Cisco ASR 9000 Series Command Reference Guide

Ethernet OAM Commands on the Cisco ASR 9000
Series Router
This module provides command line interface (CLI) commands for configuring Ethernet Operations,
Administration, and Maintenance (EOAM) on the Cisco ASR 9000 Series Router.
•
action capabilities-conflict, page 135
•
action critical-event, page 137
•
action discovery-timeout, page 139
•
action dying-gasp, page 141
•
action high-threshold, page 143
•
action remote-loopback, page 145
•
action session-down, page 147
•
action session-up, page 149
•
action uni-directional link-fault, page 151
•
action wiring-conflict, page 153
•
aggregate, page 155
•
ais transmission, page 157
•
ais transmission up, page 159
•
buckets archive, page 161
•
buckets size, page 163
•
clear ethernet cfm ccm-learning-database location, page 165
•
clear ethernet cfm interface statistics, page 166
•
clear ethernet cfm local meps, page 168
•
clear ethernet cfm offload, page 170
•
clear ethernet cfm peer meps, page 171
•
clear ethernet cfm traceroute-cache, page 173
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
131

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model