Cisco ASR 9000 Series Command Reference Guide

mlacp reset priority
To reset operational priorities of mlacp members to their configured mLACP prorities, use the mlacp reset
priority command in EXEC mode.
mlacp reset priority bundle-ether interface-path-id
Syntax Description
Specifies a physical interface instance or a virtual interface
instance.
bundle-ether interface-path-id
Command Default
No default behavior or values.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task
IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA
administrator.
This command is for aggregated ethernet interfaces only. The command cannot be used if brute-force switchover
is employed.
Task ID
OperationTask ID
executebundle
Examples
The following example shows how to use the mlacp reset priority command:
RP/0/RSP0/CPU0:router #mlacp reset priority bundle-ether 10
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
504
Global Interface Commandsonthe Cisco ASR 9000 Series Router
mlacp reset priority

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model