clear mac-accounting (Ethernet)
To clear Media Access Control (MAC) accounting statistics, use the clear mac-accounting command in
EXEC mode.
clear mac-accounting {GigabitEthernet| TenGigE} interface-path-id [location node-id]
Syntax Description
Type of Ethernet interface whose MAC accounting statistics you want to clear.
Enter GigabitEthernet, TenGigE.
{GigabitEthernet |
TenGigE}
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces
currently configured on the router.
Note
For more information about the syntax for the router, use the question mark
(?) online help function.
interface-path-id
(Optional) Clears MAC accounting statistics for the designated node. The
node-id argument is entered in the rack/slot/module notation.
location node-id
Command Default
No default behavior or values
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.1.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writeinterface
read, writebasic-services
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
81
Ethernet Interface Commands on the Cisco ASR 9000 Series Router
clear mac-accounting (Ethernet)
To Next Page
Loading...
Need help?
General
