Cisco ASR 9000 Series - 10-Gigabit Ethernet WAN PHY Controller Commandson the Cisco ASR 9000 Series Router

10-Gigabit Ethernet WAN PHY Controller
Commandson the Cisco ASR 9000 Series Router
This module describes the commands to configure a 10-Gigabit Ethernet WAN PHY physical controller on
the Cisco ASR 9000 Series Router.
For information on 10-Gigabit Ethernet (GE) interface commands see the Ethernet Interface Commandson
the Cisco ASR 9000 Series Router module.
•
clear controller wanphy, page 1096
•
clear counters wanphy, page 1098
•
controller wanphy, page 1100
•
report sd-ber, page 1102
•
report sf-ber disable, page 1103
•
show controllers wanphy, page 1105
•
threshold sd-ber, page 1114
•
threshold sf-ber, page 1116
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
1095