Cisco ASR 9000 Series Command Reference Guide

show ethernet lmi interfaces
To display Ethernet Local Management Interface (E-LMI) information for an interface, including protocol
status and error and event statistics, use the show ethernet lmi interfaces command in EXEC configuration
mode.
show ethernet lmi interfaces [type interface-path-id ][brief | detail]
show ethernet lmi interfaces [brief | detail][location location]
Syntax Description
(Optional) Displays summary information about the
E-LMI protocol status, number of EVCs and errors,
and CE-VLAN/EVC map type.
brief
(Optional) Displays the configured and operational
state of E-LMI on the interface, with counts for
reliability and protocol errors and elapsed time since
various events have occurred, including details about
subinterfaces and EVC status.
detail
(Optional) Interface type. For more information, use
the question mark (?) online help function.
type
Physical interface or virtual interface.
Use the show interfaces command to see a
list of all interfaces currently configured on
the router.
Note
For more information about the syntax for the router,
use the question mark (?) online help function.
interface-path-id
(Optional) Displays E-LMI information for the
designated node. The location argument is entered in
the rack/slot/module notation.
The location cannot be specified when you
specify an interface type.
Note
location location
Command Default
The output displays the configured and operational state of E-LMI on the interface, with counts for reliability
and protocol errors and elapsed time since various events have occurred since the protocol was enabled on
the interface or counters were cleared.
Command Modes
EXEC (#)
Command History
ModificationRelease
This command was introduced.Release 4.1.0
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
355
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
show ethernet lmi interfaces

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model