Cisco ASR 9000 Series Command Reference Guide

DescriptionField
Total number of packets that could
not be delivered because the
necessary protocol was not
configured on the interface.
drops for unrecognized upper-level protocol
Total number of Layer 2 broadcast
packets received on the interface.
This is a subset of the total input
packet count.
Received broadcast packets
Total number of Layer 2 multicast
packets received on the interface.
This is a subset of the total input
packet count.
Received multicast packets
Number of received packets that
were too small to be handled. This
is a subset of the input errors count.
runts
Number of received packets that
were too large to be handled. This
is a subset of the input errors count.
giants
Number of packets dropped due to
throttling (because the input queue
was full).
throttles
Number of packets dropped
because the parity check failed.
parity
Total number of received packets
that contain errors and hence
cannot be delivered. Compare this
to total input drops, which counts
packets that were not delivered
despite containing no errors.
input errors
Number of packets that failed the
CRC check.
CRC
Number of packets with bad
framing bytes.
frame
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
527
Global Interface Commandsonthe Cisco ASR 9000 Series Router
show interfaces

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model