Cisco ASR 9000 Series Command Reference Guide

RP/0/RSP0/CPU0:router(config)# ethernet cfm
RP/0/RSP0/CPU0:router(config-cfm)# domain Domain_One level 1 id string D1
RP/0/RSP0/CPU0:router(config-cfm-dmn)# service Bridge_Service bridge group BD1 bridge-domain
B1
RP/0/RSP0/CPU0:router(config-cfm-dmn-svc)# maximum-meps 4000
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# ethernet cfm
RP/0/RSP0/CPU0:router(config-cfm)# domain Domain_One level 1 id string D1
RP/0/RSP0/CPU0:router(config-cfm-dmn)# service Cross_Connect_1 xconnect group XG1 p2p X1
RP/0/RSP0/CPU0:router(config-cfm-dmn-svc)# maximum-meps 4000
Related Commands
DescriptionCommand
domain, on page 201
Enters CFM configuration mode.ethernet cfm (global), on page 207
Enters interface CFM configuration mode.ethernet cfm (interface), on page 209
service, on page 314
Displays information about errors that are preventing
configured CFM operations from becoming active, as well
as any warnings that have occurred.
show ethernet cfm configuration-errors, on page
322
Displays a list of local maintenance points.show ethernet cfm local maintenance-points, on
page 330
Displays information about local MEPs.show ethernet cfm local meps, on page 333
Displays information about maintenance end points
(MEPs) for peer MEPs.
show ethernet cfm peer meps, on page 339
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
275
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
maximum-meps

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model