EasyManuals Logo

Cisco ASR 9000 Series Command Reference Guide

Cisco ASR 9000 Series
1138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #921 background imageLoading...
Page #921 background image
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
For the interface-path-id argument, use the following guidelines:
•
If specifying a physical interface, the naming notation is rack/slot/module/port. The slash between values
is required as part of the notation. An explanation of each component of the naming notation is as follows:
â—¦
rack: Chassis number of the rack.
â—¦
slot: Physical slot number of the line card.
â—¦
module: Module number. A physical layer interface module (PLIM) is always 0.
â—¦
port: Physical port number of the interface.
•
If specifying a virtual interface, the number range varies, depending on interface type.
The information displayed is generally useful for diagnostic tasks performed by technical support personnel
only.
Task ID
OperationsTask ID
readinterface
Examples
The following is sample output from the show controllers pos command:
RP/0/RSP0/CPU0:router# show controllers POS 0/3/0/2
Port Number : 2
Interface : POS0/3/0/2
Ifhandle : 0x1380120
CRC : 32
MTU : 4474
Port Bandwidth Kbps : 2488320
Admin state : Up
Driver Link state : Up
Bundle member : No
Bundle MTU : 4474
Bundle Adminstate : Up
The following is sample output from the show controllers pos all command:
RP/0/RSP0/CPU0:router# show controllers POS 0/3/0/2 all
Port Number : 2
Interface : POS0/3/0/2
Ifhandle : 0x1380120
CRC : 32
MTU : 4474
Port Bandwidth Kbps : 2488320
Admin state : Up
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
901
SONET Controller Commands on the Cisco ASR 9000 Series Router
show controllers pos

Table of Contents

Other manuals for Cisco ASR 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9000 Series and is the answer not in the manual?

Cisco ASR 9000 Series Specifications

General IconGeneral
SeriesASR 9000
CategoryNetwork Router
Modular DesignYes
RedundancyYes (Hardware and Software)
Operating SystemCisco IOS XR
Interfaces/Ports10G, 40G, 100G, 400G Ethernet
Expansion SlotsVaries by model
Routing ProtocolBGP, OSPF, IS-IS, EIGRP
ManagementCLI, SNMP, NETCONF
Power SupplyRedundant
Port DensityVaries by model
Power Supply OptionsAC, DC
MemoryVaries by model
StorageVaries by model
DimensionsVaries by model
WeightVaries by model

Related product manuals