Cisco ASR 9000 Series Command Reference Guide

The following table shows DSU modes and vendor-supported bandwidths.
Table 57: DSU Modes and Vendor-supported Bandwidths
Bandwidth Multiples (in kbps)Bandwidth (in kbps)Mode
358 300.746
358–34010 for E3300–44210 for
T3
Digital Link or Cisco
500 500
1000–34010 for E31500–44210 for
T3
ADC Kentrox T3 IDSU
3158
3100–44210 kbps
Larscom Access T45
75.186
75–44210 kbps
Adtran T3SU 300
1579
1500–44210 kbps
Verilink HDM 2182
Task ID
OperationsTask ID
read, writesonet-sdh
Examples
The following example shows how to set the maximum allowable DSU bandwidth to 16,000 kbps on a SIP
in slot 6, on the SPA in subslot 2, for port 0, and T3 controller 1:
RP/0/RSP0/CPU0:router(config)# controller t3 0/6/2/0/1
RP/0/RSP0/CPU0:router(config-t3)# dsu bandwidth 16000
Related Commands
DescriptionCommand
Displays information about the E3 links and hardware and software
drivers for the E3 controller.
show controllers e3, on page 1038
Displays information about the T3 links and hardware and software
drivers for the T3 controller.
show controllers t3, on page 1054
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
995
T3, E3, T1, E1 Controller Commands on the Cisco ASR 9000 Series Router
dsu bandwidth

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model