Cisco ASR 9000 Series Command Reference Guide

DescriptionCommand
Disables SF BER reporting.report sf-ber disable, on page 1103
Configures the threshold of the SF BER that is used to trigger
a link state change.
threshold sf-ber, on page 1116
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
1115
10-Gigabit Ethernet WAN PHY Controller Commandson the Cisco ASR 9000 Series Router
threshold sd-ber

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model