Cisco ASR 9000 Series Command Reference Guide

Examples
In the following example, PPP timeout authentication is set to 20 seconds:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# interface POS 0/3/0/1
RP/0/RSP0/CPU0:router(config-if)# encapsulation ppp
RP/0/RSP0/CPU0:router(config-if)# ppp timeout authentication 20
Related Commands
DescriptionCommand
Specifies one or more authentication, authorization,
and accounting (AAA) methods for use on serial
interfaces running PPP.
aaa authentication ppp
Enables CHAP, MS-CHAP, or PAP, and specifies
the order in which CHAP, MS-CHAP, and PAP
authentication is selected on the interface.
ppp authentication , on page 720
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
753
PPP Commands onthe Cisco ASR 9000 Series Router
ppp timeout authentication

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model