Cisco ASR 9000 Series - Page 816

Task ID
OperationsTask ID
read, writehdlc
Examples
The following example shows how to configure keepalives for 3 seconds on serial interface 0/7/0/1:
RP/0/RSP0/CPU0:router(config)# interface serial 0/7/0/1
RP/0/RSP0/CPU0:router(config-if)# keepalive 3
Related Commands
DescriptionCommand
Displays statistics for all interfaces configured on the router or for
a specific node.
show interfaces, on page 516
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
796
Serial Interface Commands on the Cisco ASR 9000 Series Router
keepalive (serial)