Cisco ASR 9000 Series Command Reference Guide

OperationsTask ID
readcisco-support
Examples
The following example shows how to display IPv4, Real Time Protocol (RTP), User Datatgram Protocol
(UDP), and Non-Transmission Control Protocol (non-TCP) statistics about IP header compression (IPHC)
packets sent and received on an interface:
RP/0/RSP0/CPU0:router# show iphc ipv4 rtp interface Serial 0/1/0/1/26:0
Thu Jan 8 20:28:47.569 UTC
RTP/UDP/IP header compression statistics:
Interface Serial0/1/0/1/26:0
Rcvd: 100 total, 93 compressed, 7 full header
0 dropped, 0 status msgs
Sent: 0 total, 0 compressed, 0 fullheader, 0 status msgs
0 bytes saved, 0 bytes sent
1.00 efficiency improvement factor
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
813
Serial Interface Commands on the Cisco ASR 9000 Series Router
show iphc ipv4 rtp

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model