Cisco ASR 9000 Series - Page 885

RP/0/RSP0/CPU0:router(config-sonet)# framing sdh
In the following example, the SONET controller is configured for SONET framing:
RP/0/RSP0/CPU0:router(config)# controller sonet 0/2/0/2
RP/0/RSP0/CPU0:router(config-sonet)# framing sonet
Related Commands
DescriptionCommand
Displays information about the operational status of SONET
layers.
show controllers sonet, on page 906
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
865
SONET Controller Commands on the Cisco ASR 9000 Series Router
framing (SONET)