Cisco ASR 9000 Series - Page 946

Examples
In the following example, the BER is set to 4:
RP/0/RSP0/CPU0:router(config)# controller sonet 0/1/0/1
RP/0/RSP0/CPU0:router(config-sonet)# path
RP/0/RSP0/CPU0:router(config-sonet-path)# threshold b3-tca 4
Related Commands
DescriptionCommand
Permits selected SONET alarms to be logged to the console for
a SONET controller.
report (SONET), on page 886
Displays information about the operational status of SONET
layers.
show controllers sonet, on page 906
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
926
SONET Controller Commands on the Cisco ASR 9000 Series Router
threshold (SONET path)