Cisco ASR 9000 Series Command Reference Guide

Task ID
OperationsTask ID
read, writeinterface
Examples
The following example shows how to enter E3 configuration mode for a controller in slot 6, on the SPA in
subslot 2, on E3 controller 0:
RP/0/RSP0/CPU0:router(config)# controller e3 0/6/2/0
RP/0/RSP0/CPU0:router(config-e3)#
Related Commands
DescriptionCommand
Displays information about the E3 links and hardware and software
drivers for the E3 controller.
show controllers e3, on page 1038
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
973
T3, E3, T1, E1 Controller Commands on the Cisco ASR 9000 Series Router
controller e3

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model