Enterasys SecureStack C2 C2G170-24

delete
3-44 Basic Configuration
delete
UsethiscommandtoremoveanimageoraCLIconfig urationfilefromtheswitch.
Syntax
delete filename
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
Usethedircommand(page3‐40)todisplaycurrentimageandconfigurationfilenames.
Example
Thisexampleshowshowtodeletethe“ Jan1 _2004.cfg”configurationfile:
C2(su)->delete configs/Jan1_2004.cfg
show tftp settings
UsethiscommandtodisplayTFTPsettingsusedbytheswitchduringdatatransfersusingTFTP.
Syntax
show tftp settings
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Usage
TheTFTPtimeoutvaluecanbesetwiththesettftptimeoutcommand.TheTFTPretryvaluecan
besetwiththesettftpretrycommand.
filename Specifiesthelocalpathnametothefile.Validdirectoriesare/imagesand
/configs.44.