Enterasys SecureStack C2 C2G170-24

show multiauth
23-34 Authentication and Authorization Configuration
show multiauth
Usethiscommandtodisplaymultipleauthenticationsystemconfiguration.
Syntax
show multiauth
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplaymultipleauthenticationsystemconfiguration:
C2(rw)->show multiauth
Multiple authentication system configuration
-------------------------------------------------
Supported types : dot1x, pwa, mac
Maximum number of users : 768
Current number of users : 2
System mode : multi
Default precedence : dot1x, pwa, mac
Admin precedence : dot1x, pwa, mac
Operational precedence : dot1x, pwa, mac
set multiauth precedence 23-36
clear multiauth precedence 23-36
show multiauth port 23-37
set multiauth port 23-37
clear multiauth port 23-38
show multiauth station 23-39
show multiauth session 23-39
show multiauth idle-timeout 23-40
set multiauth idle-timeout 23-41
clear multiauth idle-timeout 23-42
show multiauth session-timeout 23-42
set multiauth session-timeout 23-43
clear multiauth session-timeout 23-44
For information about... Refer to page...