Enterasys SecureStack C2 C2G170-24

clear ipv6 gateway
21-6 IPv6 Management
Usetheshowipv6addresscommandtodisplayaconfiguredIPv6gatewayaddress.
Example
ThisexampleshowshowtoconfigureanIPv6gatewayaddressusingalink‐localaddress.
C2(su)->set ipv6 gateway fe80::201:f4ff:fe5d:1234
C2(su)->show ipv6 address
Name IPv6 Address
------------ ----------------------------------------
host FE80::201:F4FF:FE5C:2880/64
gateway FE80::201:F4FF:FE5D:1234
clear ipv6 gateway
UsethiscommandtoclearanIPv6gatewayaddress.
Syntax
clear ipv6 gateway
Parameters
None.
Defaults
None.
Mode
Switchmode,read‐write.
Example
ThisexampleshowshowtoremoveaconfiguredIPv6gatewayaddress.
C2(su)->show ipv6 address
Name IPv6 Address
------------ ----------------------------------------
host FE80::201:F4FF:FE5C:2880/64
gateway FE80::201:F4FF:FE5D:1234
C2(su)->clear ipv6 gateway
C2(su)->show ipv6 address
Name IPv6 Address
------------ ----------------------------------------
host FE80::201:F4FF:FE5C:2880/64
show ipv6 neighbors
UsethiscommandtodisplaythesystemIPv6NeighborDiscoveryProtocolcache.
Syntax
show ipv6 neighbors