Enterasys SecureStack C2 C2G170-24

Dynamic ARP Inspection Overview
SecureStack C2 Configuration Guide 17-19
exit
interface vlan 192
no shutdown
ip address 192.168.0.1 255.255.255.0
ip rip send version 2
ip rip receive version 2
ip rip enable
exit
router rip
exit
VLAN Configuration
set vlan create 10
set vlan create 192
clear vlan egress 1 ge.1.1-2
set vlan egress 10 ge.1.2 untagged
set vlan egress 192 ge.1.1 untagged
DHCP Snooping Configuration
set dhcpsnooping enable
set dhcpsnooping vlan 1 enable
set dhcpsnooping vlan 10 enable
set dhcpsnooping vlan 192 enable
set dhcpsnooping verify mac-address disable
set dhcpsnooping trust port ge.1.1 enable
Dynamic ARP Inspection Configuration
set arpinspection vlan 1
set arpinspection vlan 10
set arpinspection vlan 192
set arpinspection trust port ge.1.1 enable