Enterasys SecureStack C2 C2G170-24

clear rmon channel
SecureStack C2 Configuration Guide 15-19
Example
Thisexampleshowshowtocreatean RMONchannelentry:
C2(rw)->set rmon channel 54313 ge.2.12 accept failed control on description
"capture all"
clear rmon channel
UsethiscommandtoclearanRMONchannelentry.
Syntax
clear rmon channel index
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoclearRMONchannelentry2:
C2(rw)->clear rmon channel 2
show rmon filter
UsethiscommandtodisplayoneormoreRMONfilterentries.
Syntax
show rmon filter [index index | channel channel]
Parameters
Defaults
Ifnooptionsarespecified,informationforallfilterentrieswillbedisplayed.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplayallRMONfilterentriesandchannelinformation:
index Specifiesthechannelentrytobecleared.
indexindex|
channelchannel
(Optional)Displaysinformationaboutaspecificfilterentry,oraboutall
filterswhichbelongtoaspecificchannel.