Enterasys SecureStack C2 C2G170-24

show vlanauthorization
SecureStack C2 Configuration Guide 23-49
Mode
Switchcommand,read‐write.
Example
ThisexampleshowhowtoclearVLANauthorizationforallportsonslots3,4,and5:
C2(rw)->clear vlanauthorization ge.3-5.*
show vlanauthorization
DisplaystheVLANauthenticationstatusandconfigurationinformationforthespecifiedports.
Syntax
show vlanauthorization [port-string]
Parameters
Defaults
Ifnoportstringisentered,thestatusforallportswillbedisplayed.
Mode
Switchcommand,read‐only.
Example
ThiscommandshowshowtodisplayVLANauthorizationstatusfor ge.1.1:
C2(su)‐>showvlanauthorizationge.1.1
VlanAuthorization:‐enabled
port status administrative operational authenticated vlan id
egress egress mac address
------- -------- -------------- ----------- ----------------- -------
ge.1.1 enabled untagged
Table 23‐5providesanexplanationofcommandoutput.Fordetailsonenablingandassigning
protocolandegressattributes,referto“setvlanauthorization”onpage 23‐47and“set
vlanauthorizationegress”onpage 23‐48.
port‐string (Optional)DisplaysVLANauthenticationstatusforthespecifiedports.If
noportstringisentered,then
theglobalstatusofthesettingisdisplayed.
Foradetaileddescriptionofpossibleport‐stringvalues,referto“Port
StringSyntaxUsedintheCLI”onpage 7‐2.
Table 23-5 show vlanauthorization Output Details
Output Field What It Displays...
port Port identification
status Port status as assigned by set vlanauthorization command
administrative
egress
Port status as assigned by the set vlanauthorization egress command
operational egress Port operational status of vlanauthorization egress.