Enterasys SecureStack C2 C2G170-24

clear radius
SecureStack C2 Configuration Guide 23-7
Thisexampleshowshowtoforceanymanagement‐accesstotheswitch(Telnet,web,SSH)to
authenticatethroughaRADIUSserver.Theallparameterattheendofthecommandmeansthat
anyofthedefinedRADIUSserverscanbeusedforthisAuthentication.
C2(rw)->set radius realm management-access all
clear radius
UsethiscommandtoclearRADIUSserversettings. 
Syntax
clear radius [retries] | [timeout] | [server {index | all | realm {index | all}}]
Parameters
Mode
Switchcommand,read‐write.
Defaults
None.
Examples
ThisexampleshowshowtoclearallsettingsonallRADIUSservers:
C2(su)->clear radius server all
ThisexampleshowshowtoresettheRADIUStimeouttothedefaultvalueof20seconds:
C2(su)->clear radius timeout
show radius accounting
UsethiscommandtodisplaytheRADIUS accountingconfiguration.Thistransmitsaccounting
informationbetweenanetworkaccessserverandasharedaccountingserver.
Syntax
show radius accounting [server] | [counter ip-address] | [retries] | [timeout]
retries ResetsthemaximumnumberofattemptsausercancontacttheRADIUS
serverbeforetimingoutto3.
timeout Resetsthemaximumamountoftimetoestablishcontactwith theRADIUS
serverbeforetimingoutto20seconds.
server Deletesserversettings.
index|all Forusewiththeserverparameter
tocleartheserverconfigurationforall
serversoraspecificRADIUSserverasdefinedbyanindex.
realm ResetstherealmsettingforallserversoraspecificRADIUSserveras
definedbyanindex.