Enterasys SecureStack C2 C2G170-24

clear arpinspection limit
17-30 DHCP Snooping and Dynamic ARP Inspection
ThisexampleremovestheARPACLnamedstaticARPfromVLAN5.
C2(su)->clear arpinspection filter staticARP vlan 5
ThisexampleremovestheARPACLnamedstaticARPfromtheswitchcompletely.
C2(su)->clear arpinspection filter staticARP
clear arpinspection limit
UsethiscommandtoreturntheDAIratelimitingvaluestotheirdefaultvaluesforaportorrange
ofports.
Syntax
clear arpinspection limit port port-string
Parameters
Defaults
Rate=15packetspersecond
BurstInterval=1second
Mode
Switchmode,read‐write.
Usage
Usethesetarpinspectionlimitcommandtochangethevaluesoftheratelimitandburstinterval.
Usetheshowarpinspectionportscommandtodisplaythecurrentlyconfiguredratelimits.
Example
ThisexamplereturnstheDAIratelimitingvaluestotheirdefaultsforportge.1.1.
C2(su)->clear arpinspection limit port ge.1.1
clear arpinspection statistics
UsethiscommandtoclearalldynamicARPinspectionstatistics.
Syntax
clear arpinspection statistics
Parameters
None.
Defaults
None.
port‐string Specifiestheportsonwhichtoreturntheratelimitingvaluesto
defaults.