Enterasys SecureStack C2 C2G170-24

Configuring Spanning Tree Loop Protect Parameters
SecureStack C2 Configuration Guide 9-41
Configuring Spanning Tree Loop Protect Parameters
Purpose
TodisplayandsetSpanningTreeLoopProtectparameters,includingtheglobalparametersof
LoopProtectthreshold,window,enablingtraps,anddisputedBPDUthreshold,aswellasperport
andport/SIDparameters.See“LoopProtect”onpage 9 ‐2formoreinformationabouttheLoop
Protectfeature.
Commands
For information about... Refer to page...
set spantree lp 9-42
show spantree lp 9-42
clear spantree lp 9-43
show spantree lplock 9-43
clear spantree lplock 9-44
set spantree lpcapablepartner 9-45
show spantree lpcapablepartner 9-45
clear spantree lpcapablepartner 9-46
set spantree lpthreshold 9-46
show spantree lpthreshold 9-47
clear spantree lpthreshold 9-47
set spantree lpwindow 9-48
show spantree lpwindow 9-48
clear spantree lpwindow 9-49
set spantree lptrapenable 9-49
show spantree lptrapenable 9-50
clear spantree lptrapenable 9-50
set spantree disputedbpduthreshold 9-51
show spantree disputedbpduthreshold 9-52
clear spantree disputedbpduthreshold 9-52
show spantree nonforwardingreason 9-53