Enterasys SecureStack C2 C2G170-24

clear rmon stats
SecureStack C2 Configuration Guide 15-5
Defaults
Ifownerisnotspecified,monitorwillbeapplied.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoconfigureRMONstatisticsentry2for ge.1.20:
C2(rw)->set rmon stats 2 ge.1.20
clear rmon stats
UsethiscommandtodeleteoneormoreRMONstatisticsentries.
Syntax
clear rmon stats {index-list | to-defaults}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtodeleteRMONstatisticsentry2:
C2(rw)->clear rmon stats 2
index‐list Specifiesoneormorestatsentriestobedeleted,causingthemtodisappear
fromanyfutureRMONqueries.
to‐defaults Resetsallhistoryentriestodefaultvalues.Thiswillcauseentriesto
reappearinRMONqueries.