Enterasys SecureStack C2 C2G170-24

clear linkflap
SecureStack C2 Configuration Guide 7-29
Parameters
Defaults
Ifport‐stringisnotspecified,allportsdisabledbyalinkflapviolationwillbemadeoperational.
Mode
Switchmode,read‐write.
Example
Thisexampleshowshowtomakedisabledportge.1.4operational.
C2(rw)->clear linkflap down ge.1.4
clear linkflap
Usethiscommandtoclearalllinkflapoptionsand/orstatisticsononeormoreports.
Syntax
clear linkflap {all | stats [port-string] | parameter port-string {threshold |
interval | downtime | all}
Parameters
Defaults
Ifport‐stringisnotspecified,settingsand/orstatisticswillbeclearedonallports.
Mode
Switchmode,read‐write.
Example
Thisexampleshowshowtoclearalllinkflapoptionsonportge.1.4.
C2(rw)->clear linkflap all ge.1.4
port‐string (Optional)Specifiestheportstomakeoperational.
all|stats Clearsalloptionsandstatistics,orclearsonlystatistics.
parameter Clearslinkflapparameters.
threshold|interval|
downtime|all
Clearslinkflapthreshold,interval,downtimeorallparameters.
port‐string (Optionalunlessparameterisspecified)Specifiestheport(s)onwhich
toclearsettings.