Enterasys SecureStack C2 C2G170-24 - Show Garp Timer; Show Gvrp

show gvrp
10-22 802.1Q VLAN Configuration
show gvrp
UsethiscommandtodisplayGVRPconfigurationinformation.
Syntax
show gvrp [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,GVRPconfigurationinformationwillbedisplayedforallportsand
thedevice.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplayGVRPstatusforthedeviceandforfw.2.1:
C2(su)->show gvrp ge.2.1
Global GVRP status is enabled.
Port Number GVRP status
----------- -----------
ge.2.1 disabled
show garp timer
UsethiscommandtodisplayGARPtimervaluesforoneormoreports.
Syntax
show garp timer [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,GARPtimerinformationwillbedisplayedforallports.
Mode
Switchcommand,read‐only.
port‐string (Optional)DisplaysGVRPconfigurationinformationforspecificport(s).For
adetaileddescriptionofpossibleport‐stringvalues,refer to“PortString
SyntaxUsedintheCLI”onpage 7‐2.
port‐string (Optional)DisplaysGARPtimerinformationforspecificport(s).Fora
detaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 7‐2.