Enterasys SecureStack C2 C2G170-24 - Clear Cos All-Entries; Show Cos Port-Type

clear cos all-entries
SecureStack C2 Configuration Guide 11-35
Port Type Type Unit Maximum Rate Minimum Rate Granularity
--------- ---- ---- ------------ ------------ -----------
0 irl Kbps 1000000 64 1
Thisexamplesshowsfloodcontrolunitinformation.
C2(su)->show cos unit flood-ctrl
Type: Unit:
flood-ctrl = flood control type pps = packets per second
Port Type Type Unit Maximum Rate Minimum Rate Granularity
----------- ----------- ---- ------------ ------------ -----------
0 flood-ctrl pps 148810 0 1
clear cos all-entries
UsethiscommandtoclearallClassofServiceentriesexceptentries0‐7.
Syntax
clear cos all-entries
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocleartheCoSconfigurationforallentriesexceptentries0‐7:
C2(su)->clear cos all-entries
show cos port-type
UsethiscommandtodisplayClassofServiceporttypeconfigurations.
Syntax
show cos port-type [irl [port-type]] [flood-ctrl [port-type]]
Parameters
irl (Optional)Displaysinboundratelimitinginformation.
flood‐ctrl (Optional)Displaysfloodcontrolinformation.
port‐type (Optional)Displaysinformationforaspecificporttype.(Onlyporttype
0issupported.)