Enterasys SecureStack C2 C2G170-24 - Page 360

show cos port-type
11-36 Policy Classification Configuration
Defaults
Ifnoparametersarespecified,inboundratelimitingandfloodcontrolinformationforallport
typesisdisplayed.
Mode
Switchcommand,read‐only.
Usage
TheC2implementationprovidesonedefaultporttype(0)fordesignatingavailableinboundrate
limitingorfloodcontrolresources.Porttype0includesallports. 
Theporttype0IRLdescriptionis“C2100IRL,”whichindicatesthatthisporttypeprovidesa
maximumof100inboundratelimitingresourcesper
portgroup.Theporttype0floodcontrol
descriptionis“C23flood‐ctrl”whichindicatesthatthisporttypeprovidesamaximumof3flood
controlresourcesperportgroup.
Examples
Thisexampleshowsinboundratelimitinginformationforporttype0.
C2(su)->show cos port-type irl 0
Number of resources: Supported rate types:
irl = inbound rate limiter(s) Kbps = kilobits per second
Port type Number of Supported Eligible Unselected
Index description limiters rate type ports ports
----- ------------ --------- --------- ----------------- -----------------
0 C2 100 IRL 100 kbps ge.1.1-48 ge.1.1-4
Thisexampleshowsfloodcontrolinformationforporttype0.
C2(su)->show cos port-type flood-ctrl 0
Number of resources: Supported rate types:
flood-ctrl = flood control type Pps = Packets per second
Port type Number of Supported Eligible Unselected
Index description limiters rate type ports ports
----- ------------ --------- --------- ---------------- ------------
0 C2 3 flood-ctrl 3 pps ge.1.1-24 ge.1.1-24