Enterasys SecureStack C2 C2G170-24

clear maclock firstarrival
23-58 Authentication and Authorization Configuration
Example
ThisexampleshowshowtorestrictMAClockingto6MACaddressesonfe.2.3:
C2(su)->set maclock firstarrival fe.2.3 6
clear maclock firstarrival
UsethiscommandtoresetthenumberoffirstarrivalMACaddressesallowedperporttothe
defaultvalueof600.
Syntax
clear maclock firstarrival port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoresetMACfirstarrivalsonfe.2.3:
C2(su)->clear maclock firstarrival fe.2.3
set maclock agefirstarrival
UsethiscommandtoenableordisabletheagingoffirstarrivalMACaddresses.Whenenabled,
firstarrivalMACaddressesthatareagedoutoftheforwardingdatabasewillberemovedfromthe
associatedportMAClock.
Syntax
set maclock agefirstarrival port-string {enable | disable}
Parameters
Defaults
None.
port‐string Specifiestheportonwhichtoresetthefirstarrivalvalue.Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage 7‐2.
port‐string Specifiestheport(s)onwhichtoenableordisablefirstarrivalaging.For
adetaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 7‐2.
enable|disable Enableordisablefirstarrivalaging.Bydefault,firstarrivalagingis
disabled.