Enterasys SecureStack C2 C2G170-24

show dhcpsnooping database
SecureStack C2 Configuration Guide 17-11
3
Interface Trusted Log Invalid Pkts
----------- ---------- ----------------
ge.1.47 Yes No
ge.1.48 No No
lag.0.1 No No
show dhcpsnooping database
UsethiscommandtodisplayDHCPsnoopingdatabaseconfigurationparameters.
Syntax
show dhcpsnooping database
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
Thiscommanddisplayswherethedatabasefileisstored(locally)andwhatthewritedelayvalue
is.
Example
Thisexampleshowstheoutputoftheshowdhcpsnoopingdatabasecommand.
C2(su)->show dhcpsnooping database
agent url: local
write-delay: 300
show dhcpsnooping port
UsethiscommandtodisplayDHCPsnoopingconfigurationparametersforspecificports.
Syntax
show dhcpsnooping port port-string
Parameters
port‐string Specifiestheportorportsforwhichtodisplayconfiguration
information.